> For the complete documentation index, see [llms.txt](https://aldmodels.gitbook.io/aldmodels/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://aldmodels.gitbook.io/aldmodels/pulse-core/navigating-the-interface/analytics.md).

# Analytics

Located on the Analytics page, there are two tabs at the top: [**Analytics**](#analytics-tab) and [**Live**](#live-tab).

### Analytics tab

This is a record of how you’ve been using your locomotive.

<figure><img src="https://761432012-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FV5rjGPoL0RykGteAYaQJ%2Fuploads%2FvpjGYpgzch8oe2mCTkrN%2FAnalytics.png?alt=media&amp;token=6e20ce99-d17c-453d-a3d8-3f3a6e10c0f5" alt="" width="211"><figcaption></figcaption></figure>

| What you’ll see            | What it means                                                |
| -------------------------- | ------------------------------------------------------------ |
| Device Active Time         | How long the controller has been switched on                 |
| Driving Time               | How long your locomotive has actually been running           |
| Total Sessions             | How many power cycles the controller has had                 |
| Total Emergency Stops      | How many times you’ve used Emergency Stop                    |
| Total Function Activations | How many times you’ve used the function buttons *(DCC only)* |
| Average Driving Speed      | Your typical speed while driving                             |

To start the counts again from zero, tap **Reset Analytics** and confirm. This can’t be undone

### Live tab

This shows how much electrical power your locomotive is using right now, updating every second. It’s handy for spotting problems.

<figure><img src="https://761432012-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FV5rjGPoL0RykGteAYaQJ%2Fuploads%2FlNkUHPFELN9RUdVQ1taT%2FAnalytics%20Live.jpg?alt=media&amp;token=7d806c58-20e8-42b8-9e27-e90f179be923" alt="" width="188"><figcaption></figcaption></figure>

{% hint style="warning" %}
If the line shoots up or sits near the dashed line, something may be wrong: a short circuit or a stuck locomotive. Stop the locomotive and check.
{% endhint %}